Supported Platforms

 

Description

How to Assess Agriculture Equipment for FieldView™ Drive Compatibility

View PDF Guide (Last Updated October 1, 2017)

Check your combine set up for compatibility with our interactive guide!
For iOS devices - iPad® or iPhone devices, use this link. 
For laptops or desktop computers, use this link. 

 

The following sections will guide you through an equipment assessment.
Table of Contents
Ag Equipment Terminology    
John Deere Planters 
John Deere Commodity Carts, Air Drills, and Seeders
John Deere Tractors - GreenStar™ Ready
John Deere Tractors - Non-GreenStar™ Ready 
John Deere Combines - GreenStar™ Ready 
John Deere Self-Propelled Sprayers 
Pull-Type Liquid Applicator Rate Controllers
Case IH Planters
Case IH Commodity Carts and Air Drills
Case IH Tractors - AccuGuide™ Ready 
Case IH Tractors - Non-AccuGuide™ Ready
Case IH Combines
Case IH Self-Propelled Sprayers
New Holland Combines
CLAAS Combines
Gleaner Combines
Massey Ferguson Combines
Challenger Combines
Climate FieldView™ Drive Adapter Kits and Harnesses

Assessing Your Equipment as a System

To determine if your equipment is FieldView™ Drive compatible, it must be assessed as a complete system. The questions below should be answered for the equipment system that is being connected to a FieldView Drive.

  1. What is the field operation that needs to be performed? (planting, spraying, side dressing, harvesting)

  2. Is the rate control system on the implement compatible?
    See compatible options in matrix column B

  3. Is the GPS receiver on the tractor, combine, or self-propelled applicator compatible?
    See compatible options in matrix column E

  4. Is the display on the tractor, combine, or self-propelled applicator compatible?
    See compatible options in matrix column D

  5. How are the rate controller, GPS receiver, and display interconnected? Are factory fitted harnesses or retrofit harnesses interconnect the devices?
    See compatible options in matrix column C

Please reference the compatibility matrices on the respective equipment pages to assist in determining compatibility.

Example Matrix

ComboPlanter Model (A)Planting Rate Control System (B)Tractor Wiring Network (C)Display (D)GPS Receiver (E)Tractor Model (F)Required Hardware (Qty. 1 of each)


General Compatibility Guidelines for John Deere Equipment

These guidelines apply to all John Deere equipment listed hereafter.

  • The FieldView™ Drive is generally compatible with John Deere GreenStar™ displays, StarFire™ GPS receivers, and John Deere planting, seeding, and liquid rate controllers that are communicating with each other through a CAN bus.
  • The FieldView™ Drive is not currently compatible with:
    • Aftermarket electronics, unless specifically noted; i.e. Ag Leader, Raven, Topcon, and Trimble displays, GPS receivers, and rate controllers
    • GPS and rate controller messages transmitted through a RS-232 serial cable


General Compatibility Guidelines for CNH Equipment

These guidelines apply to all Case IH and New Holland equipment listed hereafter.

  • The FieldView™ Drive is generally compatible with CNH displays, CNH GPS receivers, and CNH planting, seeding, and liquid rate controllers (Trimble Field-IQ) that are communicating with each other through a CAN bus.

  • The FieldView™ Drive is not currently compatible with:

    • Aftermarket electronics, unless specifically noted; i.e. Ag Leader, Raven, Topcon, and Trimble displays, GPS receivers, and rate controllers

    • GPS and rate controller messages transmitted through a RS-232 serial cable